This procedure will reset the change oil light on a 1992 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button on the trip monitor and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Gauges” button on the trip monitor.
4. Hold the “Gauges” button on the trip monitor, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.

This procedure will reset the change oil light on a 1991 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Range” button, until the “Change Oil” light begins to flash.
4. Then hold the “Range” button, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.

This procedure will reset the change oil light on a 1990 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Range” button, until the “Change Oil” light begins to flash.
4. Then hold the “Range” button, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.

This procedure will reset the change oil light on a 1989 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Range” button, until the “Change Oil” light begins to flash.
4. Then hold the “Range” button, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.

This procedure will reset the change oil light on a 1988 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Range” button, until the “Change Oil” light begins to flash.
4. Then hold the “Range” button, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.

This procedure will reset the change oil light on a 1987 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Range” button, until the “Change Oil” light begins to flash.
4. Then hold the “Range” button, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.

This procedure will reset the change oil light on a 1986 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Range” button, until the “Change Oil” light begins to flash.
4. Then hold the “Range” button, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.

This procedure will reset the change oil light on a 1985 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Range” button, until the “Change Oil” light begins to flash.
4. Then hold the “Range” button, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.

This procedure will reset the change oil light on a 1984 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Range” button, until the “Change Oil” light begins to flash.
4. Then hold the “Range” button, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.

This procedure will reset the change oil light on a 1983 Chevrolet Corvette:

1. Turn the key to the ignition position.
2. Press the “Eng/Met” button and then release it, then press the “Eng/Met” button again before 5 seconds has elapsed.
3. Then within 5 seconds press and hold the “Range” button, until the “Change Oil” light begins to flash.
4. Then hold the “Range” button, until the “Change Oil” light stops flashing and goes off (about 10 seconds).
5. Then turn the key to off and then start the engine to verify that the”Change Oil” light is not on.