Setting The Time On A 2012 Chevrolet Equinox Radio LTZ Model

This is the process to set the time on A 2012 Chevrolet Equinox LTZ Model radio.

  1. Turn the ignition to the run position.
  2. Turn on the radio.
  3. Press the “Config” button.
  4. Touch the “Time and Date Setting” screen button.
  5. Touch the “Set Time” screen button.
  6. Adjust the hour, minute and AM/PM settings.
  7. Press the “Back” button to exit each menu.
Posted in Equinox, Radio | Tagged , , , , | Leave a comment

Setting The Time On A 2012 Chevrolet Equinox Radio LT Model

This is the process to set the time on A 2012 Chevrolet Equinox LT Model radio.

  1. Turn the ignition to the run position.
  2. Turn on the radio.
  3. Press the “Config” button.
  4. Touch the “Time and Date Setting” screen button.
  5. Touch the “Set Time” screen button.
  6. Adjust the hour, minute and AM/PM settings.
  7. Press the “Back” button to exit each menu.
Posted in Equinox, Radio | Tagged , , , , | 1 Comment

Setting The Time On A 2012 Chevrolet Equinox Radio LS Model

This is the process to set the time on A 2012 Chevrolet Equinox LS Model radio.

  1. Turn the ignition to the run position.
  2. Turn on the radio.
  3. Press the “Clock” button.
  4. Turn the “Menu/Select” knob till the “Time and Date Settings” are highlighted.
  5. Press the knob to select it.
  6. Turn the “Menu/Select” knob to change the values.
  7. Press the knob to confirm the settings.
  8. Press the “Back” button to exit each menu.
Posted in Equinox, Radio | Tagged , , , , | 1 Comment

Setting The Time On A 2011 Chevrolet Equinox Radio

This is the process to set the time on A 2011 Chevrolet Equinox radio.

  1. Turn the ignition to the run position.
  2. Turn on the radio.
  3. Press the “Clock” button.
  4. Turn the “Menu/Select” knob till the “Time and Date Settings” are highlighted.
  5. Press the knob to select it.
  6. Turn the “Menu/Select” knob to change the values.
  7. Press the knob to confirm the settings.
  8. Press the “Back” button to exit each menu.
Posted in Equinox, Radio | Tagged , , , , | 1 Comment

Reset The Oil Change Light On A 2012 Chevrolet Equinox

This is the process reset the oil change light on a 2012 Chevrolet Equinox.

  1. Turn the ignition to the run position.
  2. Press the “Menu” button to display the “Vehicle Information Menu”.
  3. Rotate the Up/Down arrow switch to see the “Remaining Oil Life”.
  4. Press and hold the “SET/CLR” button until 100% is shown in the Driver Information Center.
  5. Then turn the ignition to the off position and then start the engine. The light should remain off if it is reset properly
Posted in Equinox, Oil Light | Tagged , , , , | Leave a comment

Reset The Oil Change Light On A 2011 Chevrolet Equinox

This is the process reset the oil change light on a 2011 Chevrolet Equinox.

  1. Turn the ignition to the run position.
  2. Press the “Menu” button to display the “Vehicle Information Menu”.
  3. Rotate the Up/Down arrow switch to see the “Remaining Oil Life”.
  4. Press and hold the “SET/CLR” button until 100% is shown in the Driver Information Center.
  5. Then turn the ignition to the off position and then start the engine. The light should remain off if it is reset properly
Posted in Equinox, Oil Light | Tagged , , , , | 1 Comment

Reset The Oil Change Light On A 2010 Chevrolet Equinox

This is the process to reset the oil change light on a 2010 Chevrolet Equinox

  1. Turn the ignition to the run position.
  2. Press and release the gas pedal three times within 5 seconds immediately after the ignition key is in the run position.
  3. If the “Change Engine Oil Soon” indicator is off then the light has been reset. If it is still on try steps 1 and 2 again.
  4. Then turn the ignition to the off position and then start the engine. The light should remain off if it is reset properly
Posted in Equinox, Oil Light | Tagged , , , , | Leave a comment

Reset The Oil Change Light On A 2009 Chevrolet Equinox

This is the process to reset the oil change light on a 2009 Chevrolet Equinox

  1. Turn the ignition to the run position.
  2. Press and release the gas pedal three times within 5 seconds immediately after the ignition key is in the run position.
  3. If the “Change Engine Oil Soon” indicator is off then the light has been reset. If it is still on try steps 1 and 2 again.
  4. Then turn the ignition to the off position and then start the engine. The light should remain off if it is reset properly
Posted in Equinox, Oil Light | Tagged , , , , | Leave a comment

Reset The Oil Change Light On A 2008 Chevrolet Equinox

This is the process to reset the oil change light on a 2008 Chevrolet Equinox

  1. Turn the ignition to the run position.
  2. Press and release the gas pedal three times within 5 seconds immediately after the ignition key is in the run position.
  3. If the “Change Engine Oil Soon” indicator is off then the light has been reset. If it is still on try steps 1 and 2 again.
  4. Then turn the ignition to the off position and then start the engine. The light should remain off if it is reset properly
Posted in Equinox, Oil Light | Tagged , , , , | 1 Comment

Reset The Oil Change Light On A 2007 Chevrolet Equinox

This is the process to reset the oil change light on a 2007 Chevrolet Equinox

  1. Turn the ignition to the run position.
  2. Press and release the gas pedal three times within 5 seconds immediately after the ignition key is in the run position.
  3. If the “Change Engine Oil Soon” indicator is off then the light has been reset. If it is still on try steps 1 and 2 again.
  4. Then turn the ignition to the off position and then start the engine. The light should remain off if it is reset properly
Posted in Equinox, Oil Light | Tagged , , , , | Leave a comment